Polygonal Conical Staff and Round Cone Stick Welding Machine Plaza
Garden Light Pole Production line Siemens Inverter
Polygonal Conical Staff shut machine mainly use for combining the pole longitudinal steel
joint and welding the seam . This type pole was widely used in the
plaza , guarden , street etc.
As a famous factory specially in producing the pole clamping and
welding machine. We have lots of experience in producing this
machine.The pole was widely used in the city and road. It is
suitable for one piece type polygonal and circle taper light pole.
it is automatic welding line, the dolly with speed adjustable motor
can pull (or push) the light pole from small end to big end , The
hydraulic cylinder through mechanical chain, Worm wheel push the
clamping wheel to close the pole and do welding at the same time.
The machine includes the following items :
- Long working table with rack for pull doly.
- Dolly for pulling pole
- Hydraulic clamping and welding unit (including 3 sets clamping
- polygonal and circle pole)
- Submerged Arc Welding and Gas-shielded welding(CO2) Welding system,
- including welding wire feeding system.
- The flux recovering system
- back support unit
- hydraulic system
Suitable light pole Thickness base
on mild steel Q235
Light pole diameter: 60~450mm
Light pole diameter: 70~450mm
Light pole diameter: 250~450mm
Power of Motor for Pump
Power of Motor for pulling dolly
4 KW, AC speed changeable type.
630A, (Submerged Arc Welding and
Gas-shielded welding(CO2) Welding
Welding wire diameter
1.2,1.6~2mm welding wire, according the pole
thickness to do selection
1.1~2m/min (Note: different thickness speed
will be different )
Overall sizes (mm)
22000x2000x2000 mm (LXWXH)
Lincoln welding machine (USA BRAND)
Note:, If chose the Lincoln welding machine,normally it is suitable
for Submerged Arc Welding
Fast motorized return back for dolly
Note:for the standard machine, the dolly return back can be
motorized with working speed, it
is very slow for return back process. So, normally, the operator
will open the dolly clutch and
push the dolly by manual.
In order to reduce the manpower, we have option: Fast motorized
return back for dolly. The
operator only push button, the dolly will be back to the welding
See attached detail photos.
Both Side additional hydraulic cylinder
It is suitable for small diameter big thickness light pole, or
steel plate with high tensile
strength light pole.
With this additional option , the diameter from 60~450mm, thickness
2.8~6mm, all pole can be
suitable. And easy for operation.
Electricity pole and lamp pole was widely used in the countryside
and City ,such as electricity transport pipe , shine lamp pole ;
blinker , Offshore,Petro Chemical ; Plate Heat Exchanger ; Charged
air cooler ; Pressure Vessel ;Pipe system&Steel works etc.
1. All the bolt using 12.9 grade Bolt , not using 8.4 grade. Making
the machine more stronger.
2. 20 % overweight design , could making the rotator focus more.
3. Double row wheels ,not only making the wheels stable, but also
artifacts to increase friction.
4. All the parts using well-known brands in China or other
countries . Quality is more reliable .
5. Using double row bearings.
6. The base of rotator welded by plates, with high strength, no
deformation after long time using.
Why choose my factory?
360°guarantee makes ordering risk free.
20 years welding machine manufacture experiences.
one-stop service of welding.
Quickly feedback for your problems.